Hypro Brass Hydraulic Driven Gear Pump 10.4 GPM 100 PSI Gerotor - 8304BV-HM5C

Genuine Hypro 8304BV-HM5C Brass Hydraulic-Driven Gear Pump Assembly

Genuine Hypro (Pentair) positive-displacement gear pump assembly designed for de-icing and anti-icing pre-wet applications.

The integrated pump and hydraulic motor eliminate the need for shaft alignment or a separate Lovejoy coupling. Its compact design makes it suitable for installations where space is limited and for retrofitting existing equipment.

The brass pump construction is suited to salt-solution applications. A gear-pump design with minimal moving parts and an internal-gear gerotor hydraulic motor provide a compact fluid-handling assembly. The motor's bypass adjustment allows flow-control fine-tuning.

Specifications
- Model: 8304BV-HM5C
- Pump type: Positive-displacement gear pump
- Drive: Hydraulic
- Pump material: Brass
- Maximum pump flow: 10.4 GPM (39.4 L/min)
- Maximum pump pressure: 100 PSI (6.9 bar)
- Maximum hydraulic flow: 4.5 GPM (17 L/min)
- Hydraulic operating guidance: Run above 2.0 GPM hydraulic flow
- AGCO cross-reference: ACP0693090

Connections
- Inlet: 1/2-inch NPT
- Outlet: 3/4-inch NPT with check valve to prevent reverse flow

Pressure Relief Option
An optional pressure relief valve is available for 8304BV models to safeguard against pressure buildup. Confirm whether it is included in the assembly being supplied.

Performance Notes
Manufacturer performance-chart data covers hydraulic pressures from 200 to 850 PSI and was generated using water. Performance will vary with fluid viscosity. The listed maximum flow and pressure should not be interpreted as a guaranteed simultaneous operating point.